How To Work In SP Flash Tool ( Tutorial )

        How To Use SP Flash Tool         

What's needed:

• USB data cable

• MediaTek USB VCOM drivers

• SP Flash Tool
  

First of all, make sure that you have MediaTek DA USB VCOM drivers installed

     Flashing the whole ROM

 First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
(MT65xx_Android_scatter_emmc.txt or MT6577_Android_scatter_emmc.txt, depending on which phone you have) for your device and ignore any message that may appear.

 

• Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).

• Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
  The process will start and a red progress bar will appear.

  
  
  
  

  After the red progress bar is complete, there will appear a purple progress bar.

  

  Right after the purple progress bar is complete, a message will appear underneath it:
  “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).

  

  When the yellow bar is complete, you'll get a popup with a green circle and Download OK message,
  which means that the process has been successfully terminated.

  

  You can now safely disconnect your phone and turn it on. The process ends here.

   Flashing only part of the ROM

  In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed.
  Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).

  

  The tool will immediately show a warning because not all parts are selected, but you should continue anyway, Safely press Yes to continue.....

  

  The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear........................

   

  

   

  

  Please note that, even though it isn't mandatory to select it on the list of images to flash,
  preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode.

   Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.

   SP Flash Tool are for SmartPhone products

  MT6573\72 Innovative Platform for Mainstream Smartphones
  MT6575 Dual-SIM smartphone platform for the mainstream market
  MT6577 1 GHz Dual-Core Smartphone Platform
  MT6582 Quad-Core Cortex-A7 1.2GHz+CPU Smartphone Platform
  MT6589 Quad-Core Cortex-A7 1GHz+CPU Smartphone Platform

  MTK Flash Tool is for Feature Phone chips

  MT6223 GSM/GPRS solution for ULC/ULC+ market
  MT6235 GSM/GPRS/EDGE solution for Mainstream Multimedia
  MT6236 GSM/GPRS/EDGE Feature- rich Multimedia solution
  MT6238 GSM/GPRS/EDGE Premium Multimedia solution
  MT6239 GSM/GPRS/EDGE Premium Multimedia solution
  MT6250 Single- Chip GSM/GPRS/EDGE- RX entry- multimedia solution
  MT6252 GSM/GPRS/EGPRS entry- multimedia single chip solution
  MT6253 Single- Chip GSM/GPRS entry- multimedia solution
  MT6255 Single- Chip GSM/GPRS/EDGE- RX Smart Feature Phone solution
  MT6268 High- end EDGE/GPRS/WCDMA Feature Rich Multimedia Phone Solution
  MT6276M HSPA Data Modem Solution
  MT6516 EDGE/GPRS Feature Rich Multimedia Smart Phone Entry Solution